Table of Contents
Advertisement
An evaluation MCU on the M34282T5-OPT and the target system are connected as shown below.
(1) Pin connected directly to the target system (1 type, 1 line)
(2) Pins connected to the target system via emulation circuits etc. (5 types, 17 lines)
(3) Pins not connected to the target system (2 types, 2 lines)
* With the M34282T5-OPT, X
4.7 LED
Figure 4.9 shows the LED layout of M34282T5-OPT. The LED lights in green when the power is
supplied to the MCU board.
Figure 4.9 Layout of LED
• V
SS
• G
to G
0
3
• D
to D
0
7
• E
to E
0
2
• CARR
• V
DD
• X
IN
• X
OUT
when changing the system clock frequency, change the frequency of the oscillator circuit board
OSC-2.
and X
pins are not connected to the target system. Therefore,
IN
OUT
( 22 / 38 )
Advertisement
Table of Contents
