tams elektronik Booster B-3 Manual page 8

English
1 Track port
2 Märklin booster port
3 DCC booster port
4 Transformer port
5 RailCom
6 Track voltage
7 Operation display (LED)
Ports
The booster B-3 can be connected either to a port for a Märklin-
compatible booster or to a DCC-conforming booster port. Advice: The
port ( Märklin-compatible or DCC-conform) used for the booster´s
connection to the control unit, is of no importance for the data format
used to control the decoders. Use the port compatible to your control
unit.
Please note: With control units providing both booster ports (e.g. Tams
MasterControl and Tams RedBox) you have to set the short circuit
polarity according to the booster port in use.
Data formats
The booster B-3 is a multi protocol booster and capable of amplifying
data sent in the Motorola or the DCC format. It transmits control
commands in mfx-format as well, but no mfx feedback signals.
Page 8
Booster B-3