tams elektronik Booster B-3 Manual page 18

English

The LED flashes slowly.
Possible reason: The control unit has been switched off or the
connection to the control unit has been interrupted. à Check the
control unit and the connections.

The LED flashes quickly.
Possible reason: There is a short circuit at the track output.
Therefore the booster switches off automatically and after approx. 5
seconds automatically on again. In case the short circuit is still there
after autostarting, the booster switches off immediately. This
procedure is repeated five times, followed by a one minute break.
à Eliminate the short circuit.
Hotline
If problems with your device occur, our hotline is pleased to help you
(mail address on the last page).
Repairs
You can send in a defective device for repair (address on the last
page). In case of guarantee the repair is free of charge for you. With
damages not covered by guarantee, the maximum fee for the repair is
50 % of the sales price according to our valid price list. We reserve the
right to reject the repairing of a device when the repair is impossible for
technical or economic reasons.
Please do not send in devices for repair charged to us. In case of
warranty we will reimburse the forwarding expenses up to the flat rate
we charge according to our valid price list for the delivery of the
product. With repairs not covered by guarantee you have to bear the
expenses for sending back and forth.
Page 18
Booster B-3