Technomark maintains the right to modify information or specifications contained in this manual without prior warning. You must contact the Technomark Company to know about any changes that may have been implemented. Under no circumstances may Technomark be liable for any incident, direct or indirect, concerning damages, however exceptional, including but not exclusively financial losses linked to the use of information included in this manual. This clause applies as well in the case where Technomark would have been informed, and/or would have known before hand of possible risks, associated with the use of the equipment. Technomark guarantees the equipment made by the company, as defined in the general sales conditions. Unless otherwise specified on our order receipt, our equipment is guaranteed 1 (ONE) year from the date of delivery. ...
If the Value is 01, the serial number will increase until 99 then will start again to 01. Page 16 sur 47 TECHNOMARK www.technomark-marking.com 3 Allée Michaël FARADAY Parc d’activités STELYTEC 42400 SAINT-CHAMOND (France) Tel : +33 (0) 4 77 22 25 91 Fax : + 33 (0) 4 77 22 38 93 E-mail : info@technomark-marking.com Modèle du 29/10/2015...
#CM : month on a character. Result is for example D for April (depending on settings) Page 20 sur 47 TECHNOMARK www.technomark-marking.com 3 Allée Michaël FARADAY Parc d’activités STELYTEC 42400 SAINT-CHAMOND (France) Tel : +33 (0) 4 77 22 25 91 Fax : + 33 (0) 4 77 22 38 93 E-mail : info@technomark-marking.com Modèle du 29/10/2015...
The configuration of this function is done with the following window: Page 25 sur 47 TECHNOMARK www.technomark-marking.com 3 Allée Michaël FARADAY Parc d’activités STELYTEC 42400 SAINT-CHAMOND (France) Tel : +33 (0) 4 77 22 25 91 Fax : + 33 (0) 4 77 22 38 93 E-mail : info@technomark-marking.com Modèle du 29/10/2015...
Add a ZInline move to mark allow to move the axis to its marking position during the marking. Page 26 sur 47 TECHNOMARK www.technomark-marking.com 3 Allée Michaël FARADAY Parc d’activités STELYTEC 42400 SAINT-CHAMOND (France) Tel : +33 (0) 4 77 22 25 91 Fax : + 33 (0) 4 77 22 38 93 E-mail : info@technomark-marking.com Modèle du 29/10/2015...
Need help?
Do you have a question about the M4 inline and is the answer not in the manual?
Questions and answers