Advertisement
7. Precautions
Notes on This Product:
We cannot accept any request for repair.
When using the oscillator circuit on the M38C59T-RLFS, check the output waveform of pins X
oscilloscope.
When mounting an oscillator circuit on the M38C59T-RLFS, make sure that 2 mm or more of a DIP pin does not
appear on the rear face (solder side). It may be short-circuited with the DIP pin of the converter board.
For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage
8. External Dimensions
Figure 5 External dimensions
9. Connecting to the Target System
80-pin 0.8-mm-pitch
M3T-F160-80LCC
(0.8-mm-pitch)
M3T-FLX100-T
(Optional)
LCC socket
(Optional)
Figure 6 Connecting to the target system
M38C59T-RLFS
80-pin LCC
M3T-80LCC-DMS
M3T-FLX-80NRA
80-pin QFP
(Optional)
IMPORTANT
http://www.renesas.com/en/tools
64.0
R1
RESET
GND
VCC
+
C5
R6
R5
C6
(Optional)
M3T-FLX100-R
M3T-FLX100-T
(Optional)
(Optional)
(4/4)
OUT
80-pin 0.5-mm-pitch
M3T-F160-80LCC
80-pin LCC
(0.8-mm-pitch)
M3T-80LCC-DMS
(Optional)
M3T-FLX100-R
(Optional)
M3T-FLX-80NSD
80-pin LQFP
(Optional)
and X
by an
COUT
Unit: mm
Advertisement
