6. Getting Connected Guide
Bandwidth Requirements
Minimum bandwidth required for SMARTconnect
Power Requirements
• SMARTconnect Insignia Units: These run on battery power (4 D batteries) and do not require power from the
facility.
• SMARTsync: This will require facility power via the relevant cord (see table), purchased by customer.
Life Fitness Part Number
1019820-0001
1019820-0002
1019820-0003
1019820-0004
• WASPs: These will be powered over Ethernet (PoE) via PoE cables running from WASP to network switch.
™
is 10 Mbps. This does not vary based on numbers of units installed.
Description
LINE-CORD: 18AWG, IEC320 C5, 6FT/1.8M, USA PLUG NEMA 5-15P
LINE-CORD: 18AWG, IEC320 C5, 6FT/1.8M, EU PLUG CEE 7/7
LINE-CORD: 18AWG, IEC320 C5, 6FT/1.8M, UK PLUG BS-1363
LINE-CORD: 18AWG, IEC320 C5, 6FT/1.8M, AU PLUG AS 3112
Page 13 of 55