Speedtouch™ Home Install Wizard - THOMSON SpeedTouch 580 Installation And Setup Manual

Chapter 3
Internet Access in No Time
Internet connection
Preconditions
Launching the Home
Install Wizard
Detecting the
SpeedTouch™
16
3.1 SpeedTouch™ Home Install Wizard
With the help of the SpeedTouch™ Home Install Wizard you will be on the Internet in
setup a flash.
First, the wizard will try to detect your SpeedTouch™. After connecting your PC, the
wizard will configure your SpeedTouch™ and - if necessary - your PC.
The Home Install Wizard was designed for Microsoft Windows operating systems
and Mac OS X - in the latter case provided you will use a wired connection to your
SpeedTouch™.
Make sure that:
Your SpeedTouch™ is only connected to a DSL-enabled phone line and to an
electrical outlet.
Your SpeedTouch™ is correctly set up and turned on.
Your SpeedTouch™ is in its default configuration state.
To launch the SpeedTouch™ Home Install Wizard:
Launch the SpeedTouch™ Setup CD.
1
See
information.
The SpeedTouch™ CD menu pops up.
2
If not, refer to
page
In the SpeedTouch™ CD menu, click Setup my SpeedTouch to start the
SpeedTouch™ Home Install Wizard.
On the Welcome page, click Next to continue.
3
The Software License Agreement window appears.
4
You must accept before continuing. Click Yes to accept.
If you accepted this License Agreement in a previous configuration
setup, this window will not be shown.
The SpeedTouch™ Home Install Wizard will check your system and will search for
your SpeedTouch™ on the local network. A progress bar is displayed.
If more than one device is found, all available devices will be listed. Select
your SpeedTouch™ and click Next.
"2.3 The SpeedTouch™ Setup CD" on page 13
"The SpeedTouch™ CD does not start automatically" on
36.
for more
E-DOC-CTC-20050126-0005 v1.0