Dish Assembly Overview
Use this page both as a parts lists for your satellite antenna, and a general overview of how the
parts fit together; but DON'T ASSEMBLE THE DISH YET.
If your reflector looks like the
one on the left, you should
have:
•
Mounting foot and mast
•
Satellite dish reflector
•
LNB (Low Noise Block
converter)
•
LNB support arm
•
Hardware packet
If you have a Sony reflector, you
should have:
•
Mounting foot and mast
•
Satellite dish reflector
•
LNB (Low Noise Block converter)
and LNB support arm
•
Hardware packet
Flat head bolts
LNB
Retainer nut
Phillips head screw
LNB support arm
Mounting foot
LNB
LNB support arm
Mounting foot
Dish Assembly Overview
Metal
Note
Reflector
If you have a plastic reflector,
the bolts are molded into the
reflector; on metal reflectors,
the bolts must be inserted
through the holes on the
Self-locking nuts
reflector before attaching
the reflector to the support
arm.
Mast
Nut, star washer,
hex head bolt
Reflector
Pre-assembled
mast clamp
Mast
Preparing for Installation 13