THOMSON SpeedTouch 350 Setup And User Manual page 48

4 Support
On Mac OS X
46
The SpeedTouch™ CD Browser menu appears:
3
Click Diagnostics & Maintenance.
The following window appears:
4
Click Upgrade My SpeedTouch™ to start the SpeedTouch™ Upgrade wizard.
See " Upgrade procedure" on page 47
Proceed as follows:
Insert the SpeedTouch™ Setup CD-ROM in your PC's CD-ROM drive.
1
Open the CD-ROM and browse to the osx folder.
2
In the osx folder double-click upgradeST.pkg to install the SpeedTouch™ Upgrade
3
application.
The installation wizard may prompt you for authentification. If this is
Note
the case, click
If your computer runs Mac OS X v10.3, your computer may prompt
Note
you to run a program to determine if the installer package can be
installed. If this the case, click Continue.
After installation go to the Applications > Speedtouch folder on the system startup
4
disk (usually the location where you installed the SpeedTouch™ Upgrade applica-
tion) and double-click SetupST. to start the SpeedTouch™ Upgrade wizard.
The Choose Language window prompts you to select a language.
5
Select the language of your choice and click OK.
The selected language will also be used as default language in the
Note
SpeedTouch™ web pages. See
mation on how to change the web page language.
See " Upgrade procedure" on page 47
to continue.
to enter your credentials.
" Language" on page 31
to continue.
for more infor-
E-DOC-CTC-20031204-0011 v2.0