Casio EXILIM G MA0910-A 1170 User Manual page 168

Problem
A recorded image
was not saved.
Though available
lighting is bright,
the faces of people
in the image are
dark.
Night shots come
out bad.
Subjects are too
dark when shooting
images in a
seashore or ski
area.
The focus frame
does not appear on
the monitor screen.
Digital zoom
(including HD
zoom) does not
work. The zoom
bar indicates zoom
only up to a zoom
factor of 3.0.
When shooting
with Auto Shutter,
the shutter does
not trigger.
Possible Cause and Recommended Action
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
battery as soon as possible (page 18).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Not enough light is reaching the subjects. Change the flash
mode setting to < (Flash On) for daylight synchro flash (page
40), or adjust EV shift to the + side (page 83).
Use the following BEST SHOT scenes (page 58) when shooting
at night.
• Night Scene (for shooting night scenery only)
• Night Scene Portrait (for shooting people against night
scenery)
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Change the flash mode setting to <
(Flash On) for daylight synchro flash (page 40), or adjust EV
shift to the + side (page 83).
Normally, turning off the camera while "Detect Smile" is
selected for Auto Shutter will cause the camera's face detection
setting to change. You will need to change the face detection
setting again after turn on the camera. You can tell the camera
to remember the Auto Shutter setting by selecting "On" for the
"Auto Shutter" power on default setting (page 81).
1)The digital zoom setting may be turned off. Turn on digital
zoom (page 79).
2)Date stamping may be turned on, which will cause digital
zoom to be disabled. Turn off date stamping (page 142).
Auto Shutter may not trigger when shooting under very bright or
very dark conditions, or when shooting a fast moving subject,
etc. If this happens, try changing the Auto Shutter Trigger
Sensitivity setting (page 75), or press the shutter button all the
way down to release the shutter and shoot the image.
168
, charge the
Appendix