iCoolsport iCool MiPod Series Owner's Manual page 8

How To Use Your MiPod
For models with external refrigeration units......
In addition to all points in the previous section...........
a) Connect the 2 water pipes between the MiPod and the external chiller as illustated elsewhere in the manual.
b) Add insulation to the full length of the 2 water pipes, otherwise a lot of cold energy will be lost to the surrounds.
b) If you have requested an external touch screen, connect the data cable between the external chiller and the touch
screen and mount the touch screen in a suitable place for easy access.
If your chiller has the touch screen factory installed in the chiller cabinet then no further action is required.
6. Fill with water
Fill pool with water but allow enough space above the water to handle the water displacement and prevent overflow
when users enter the pool. This is particularly important if you intend to have 2 or 3 people use the MiPod Pro at the same
time. 3 people will displace a lot of water.
A permanent water connection is not required. Simply fill your MiPod with a hose.
Once it's filled up, turn the main power on and the touch screen will light up with a welcome screen.
7. Operation
Pool must be filled with water to at least cover the top water fitting or it will draw air and cause the safety system to shut the
system down.
Once filled turn on the main electric power at the wall outlet.
The page shown below will appear after a short time. It takes up to 30 seconds for the system to self test. Wait until the page
appears before you touch the screen.
Tap the screen anywhere to proceed..............
iCool Compact Series | Owners Manual
TAP TO GET STARTED
Page 08