iCoolsport iCool MiPod Series Owner's Manual page 11

Start up your pool in the HEAT Mode
Please Note: Heating is only possible with the DT (Dual Temp) or heat only models
SELECT the TEMPERATURE you require, with the
displays the HOT temperature as you set it
Quickly touch the SET button to lock it in.
Your SET Temperature will now be displayed permanently on the left display and the large display in the
middle will continuously display the actual POOL WATER Temperature.
Touch the START BUTTON and your MiPod will start up and run automatically in the heating mode.
For safety reasons you can not select temperatures above 40 degrees C (104 degrees F).
Dual Temperature MiPods will automatically select if it needs to either
required water temperature.
To STOP your MiPod at any time simply touch the
Continuous "Always Available" Operation.
Your MiCool has been manufactured using quality components from the world's leading manufacturers
and is therefore capable of continuous 24/7 operation.
Therefore, if you wish to have your pool available at your desired temperate at any time of the day or
night then you can leave it running continuously at very low operating cost.
A sophisticated power management system is included that will automatically use several sensors to
evaluate all conditions and adjust to use the lowest power possible to maintain your set temperature.
Because of the extremely effective insulation it will only need to operate for a short time each day to
maintain your desired temperature and always be ready for use.
In summary, it is so efficient that if you use it every day it will cost less to operate if you leave it running
continuously.
iCool Compact Series | Owners Manual
-
+
or buttons , the display above these buttons
CHILL or
STOP button.
HEAT to achieve your
Page 0 1 1