Put Batteries In The Remote; How To Use The Remote Control To Complete The Initial Setup; Set The Menu Language - RCA TruFlat 32F530T User Manual

Connections & Setup
Plug in the TV
Plug the end of the power cord into a grounded wall outlet. Insert the plug
completely into the outlet.

Put batteries in the remote

• Remove the battery compartment cover from the back of the remote by
pushing down on and sliding off the cover.
• Insert 2 fresh "AAA" batteries. Make sure the polarities (+ and -) are aligned
correctly.
• Replace the cover.

How to Use the Remote Control to Complete the Initial Setup

The technical term is "Navigation"– how you move through the on-screen menus.
The method is the same throughout the menu screens: highlight your choice and
select it.
To highlight a menu item, press the arrow buttons on the remote to highlight one
of the items listed on the screen. Use the up or down arrow button to move up or
down. Use the right or left arrow button to move right or left.
To select the item that you've highlighted, press OK.
Note: Highlighted means that the menu item stands out from other menu items on the list
(appears darker, brighter, or a different color).
Turn on the TV
Press TV on the remote, or press POWER on the TV's front panel.
Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. "TV
mode" means that the buttons on the remote control operate the TV's functions.
SETUP
Select the language to be used
in these menus.
1 English
2 Español
3 Français
8
Graphics contained within this publication are for representation only.

Set the Menu Language

The first part of the SETUP asks you to select your preferred
language for the menu system.
1. Highlight your preferred language for the menu system.
2. Press OK to select that language.
Chapter 1