RCA TruFlat 32F530T User Manual page 24

Using the TV's Features
Set VCR Channel Displays a list that lets you set up the channel that the TV
tunes to when you press the VCR button on the remote.
Set DVD Channel Displays a list that lets you select the channel that the TV
tunes to when you press the DVD button.
Set SAT/CABLE Channel
5. Highlight the choice that matches the way you have the component connected
to this TV, and press OK.
The choices and a brief explanation follow:
SET SAT/CABLE CHANNEL
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video Input 1
6 Video Input 2
22
Graphics contained within this publication are for representation only.
Not available with your remote control.
Not connected Choose this if you don't have this particular
component connected to the TV, or if you don't want the TV
to automatically tune to the correct channel when you're
using this component.
Channel 2 (SAT/CABLE only- Not available with your remote
control).
Channel 3 Component is connected to the CABLE/ANTENNA
jack on the back of the TV, and you want the TV to tune to
channel 3 when you press the corresponding button on the
remote. Reminder: make sure the component's Channel 3/4
switch is set to channel 3.
Channel 4 Component is connected to the CABLE/
ANTENNA jack on the back of the TV, and you want the TV to
tune to channel 4 when you press the corresponding button
on the remote. Reminder: make sure the component's
Channel 3/4 switch is set to channel 4.
Video Input 1
VIDEO jack on the back of the TV and you want the TV to
tune to VID1 Input Channel when you press the component
button.
Video Input 2
VIDEO jack on the back of the TV and you want the TV to
tune to VID2 Input Channel when you press the component
button.
Note: You should choose Video Input 1 or 2 for your VCR if you
connected it to the TV with audio/video cables.
Component is connected to the INPUT1
Component is connected to the INPUT2
Chapter 3