Complete Auto Channel Search; The Guide Plus+ System Setup - RCA TruFlat 32F530T User Manual

SETUP
Would you like the TV to search
for all available channels?
1 Search for channels
2 Skip this step
Chapter 1
Graphics contained within this publication are for representation only.

Complete Auto Channel Search

The next part of the SETUP asks if you want the TV to search
for all available channels. This is sometimes called "auto
programming."
1. Press OK to tell the TV to begin searching for channels. A
progress report appears on the screen.
2. When the screen on the TV tells you the search is
complete, press OK (the first GUIDE Plus+ system setup
screen appears).
Note: If you skip Auto Channel Search now, you can access it later
through the Channel menu. See Chapter 4 for more details.

The GUIDE Plus+ System Setup

The GUIDE Plus+ system is an on-screen interactive program
guide that lists what shows are on TV in your area. In order to
receive program listings, you need to complete the following
steps.
The G-LINK cable must be connected to the back of your TV,
and the wands must be placed in front of the remote sensor
on your cable box and/or VCR in order for the GUIDE Plus+
system to work (go back to page 7 for details).
Step 1: Identifying Your TV's Location
Use the arrow buttons to select country and press OK. Then
use the digits or arrow buttons to enter your zip code or
postal code and press OK.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup.
If you use a cable box, you will need to identify the channel
you tune your TV to when using the cable box, and the brand
of cable box.
If your brand is not listed, choose "not listed" to run the test.
Follow the on-screen instructions to test your cable box.
Connections & Setup
9