Advertisement
Cleaning the monitor
NOTICE:
1. Do not hit or apply excessive force to the LCD screen during
cleaning. Doing so may damage the monitor.
2. Never use a stiff or hard cloth to clean the monitor.
Doing so may damage the monitor cover or LCD screen.
3. Do not allow liquid droplets to remain on the LCD screen.
The droplets may cause small stains when they dry or may enter the
LCD screen, possibly resulting in failure.
Cleaning the surface of the touch panel
Cleaning the system, main panel, and transducer connector
(a) Monitor cover
Clean the monitor cover using a soft cloth
moistened with mild detergent.
(b) LCD screen
Use a soft cotton cloth or lens cleaning paper
to clean the LCD screen.
If stains on the LCD screen are difficult to
remove, wipe the screen gently with a soft
cloth slightly moistened with water or mild
detergent and then wipe it dry with a soft, dry
cloth.
(a) Clean the surface of the touch panel using a
commercially available lens cleaning cloth
(non-woven rayon cloth etc.).
(b) If necessary, use a piece of soft cloth
moistened with water or mild detergent and
then tightly wrung out.
(a) Wipe the system using a soft cloth moistened
with mild detergent.
(b) Clean around the switches or keys on the
main panel using cotton buds.
(c) Wipe the transducer connector with a soft, dry
cloth. If it is difficult to remove all the stains
with a dry cloth, use a soft cloth moistened
with water.
No. 2B771-447EN*F
257
Advertisement
