Kingfisher DG1903 Manual page 13

Care and Maintenance
Plug replacement
This appliance is supplied
with a BS1363 3 pin plug fitted
with a 3 Amp fuse. Should the
fuse require replacement, it
must be replaced with a fuse
rated at 3 Amp and approved
to BS1362.
In the event the mains plug
has to be removed/replaced
for any reason, please note:
IMPORTANT: The wires in
the mains lead are coloured
in accordance with the
following code:
Blue – Neutral
Brown – Live
BLUE
Neutral
Cord
Clamp
194883_50593400193210_5059340019338_NONAME_A5_IM_Multi_V03.indb 13 194883_50593400193210_5059340019338_NONAME_A5_IM_Multi_V03.indb 13
As the colours of the
wires in the mains lead
of this appliance may
not correspond with
the coloured markings
identifying the termin als
in your plug, proceed as
follows. The blue wire must
be connected to the terminal
marked with an N or coloured
black.
The brown wire must be
connected to the terminal
marked with an L or coloured
red.
WARNING: Never connect
live or neutral wires to the
earth terminal of the plug.
NOTE: If a moulded plug is
BROWN
Live
fitted and has to be removed
take great care in disposing
FUSE
of the plug and severed
3 Amps
cable, it must be destroyed
to prevent engaging into a
socket.
13
13-12-2019 14:00:58 13-12-2019 14:00:58