Product Assembly - KitchenAid KSM5SSB Owner's Manual

PRODUCT ASSEMBLY

ATTACHING THE STAINLESS STEEL BOWL
Before First Use
Your Stand Mixer is individually adjusted at the factory for optimal performance. When using the
Stainless Steel Bowl, it may be necessary to readjust the beater-to-bowl clearance. Please refer
to the Stand Mixer Instructions manual for complete information on adjusting the beater-to-bowl
clearance, or call 1-800-541-6390 Monday through Friday 8-8 EST and we would be happy to
assist you in making this adjustment.
IMPORTANT: Before use, wash with hot, soapy water; rinse and dry thoroughly. It is not
necessary to season the Stainless Steel Bowl before use.
NOTE: This Stainless Steel Bowl is designed to fit all 4.5 and 5 quart Tilt Head Stand
Mixer models except model KN15E1X. Follow these instructions to attach the Stainless
Steel Bowl to your Stand Mixer.
1
1
Turn the Stand Mixer OFF (0) and unplug.
3
3
Place the bowl on the Clamping Plate to
secure in place.
*Locking option is available on selected models.
W11411631D.indb 3 W11411631D.indb 3
2
2
Unlock and lift the Motor Head. Then,
lock* the head to keep it lifted.
4
4
Attach the appropriate accessory for your
recipe, using the directions in the Stand
Mixer Instructions manual. Then place the
Motor Head back in the down position and
lock into place.
3
11/11/2020 2:35:50 PM 11/11/2020 2:35:50 PM