Welbilt CREM EVO II Quick Start Manual

Welbilt CREM EVO II Quick Start Manual

Advertisement

6. Making a coffee
SV Brygga kaffe
EN-
A. Place the cup under the outlet
B. Select the desired drink from the touchscreen, follow the
on-screen instructions.
A.
SV-
A. Placera en kopp under utloppet.
B. Välj önskad dryck på pekskärmen och följ instruktionerna
på skärmen.
B.
crem.coffee
EVO II
Quick start guide
Quick_Start_Guide_EVO_II
Part No.: 10043197_01

1. Unpacking and positioning

SV Uppackning och positionering
Important!
EN-
For machines with a base cabinet,
refer to the Base Cabinet Quick Start Guide first.
A. Lift the machine out of the box.
B. Place the machine on a level, waterproof surface.
A.
Viktigt!
SV-
För maskiner med underskåp,
läs först "Snabbstartguide för underskåp".
A. Lyft ut maskinen ur kartongen.
B. Placera maskinen på ett plant och vattentätt underlag.
B.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CREM EVO II and is the answer not in the manual?

Questions and answers

Summary of Contents for Welbilt CREM EVO II

  • Page 1 6. Making a coffee SV Brygga kaffe A. Place the cup under the outlet A. Placera en kopp under utloppet. B. Select the desired drink from the touchscreen, follow the B. Välj önskad dryck på pekskärmen och följ instruktionerna on-screen instructions. på skärmen. EVO II Quick start guide Quick_Start_Guide_EVO_II Part No.: 10043197_01...
  • Page 2 2. What’s in the box? 4. Installation - SSW machines with base cabinet SV Vad ingår i lådan? SV Installation – SSW-maskiner med underskåp Connect the machine to the water tap. Use the 8 mm hose and fittings provided with the machine (1) and the three water hoses from the base cabinet to the machine (2). Connect the feed hose to the CO2 bottle regulator and the SSW unit then open the tap on the regulator (3). Open the water tap (4). Connect the base cabinet and the machine’s power cord to a grounded electrical outlet (5). Turn on the switches located Connector 1/4” - 8Mm Koppling,1/4” - 8Mm on the back of the machine and the base cabinet.

Table of Contents