Connecting Directly To A Pictbridge Compatible Printer - Casio EXILIM EX-Z670 User Manual

Connecting Directly to a PictBridge Compatible Printer

You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1.
Turn on the camera and press [MENU].
2.
On the "Set Up" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "PTP (PictBridge)", and then press [SET].
. Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer's USB
port.
• The camera does not
draw power over the USB
cable. Make sure the
camera's battery is
sufficiently charged before
connecting.
• Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert the
connector fully can result
in poor communication or
malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make sure you
align the connector correctly with the port.
Large connector
USB
USB port
USB/AV port
Making sure that the
connector is towards the lens side, connect the cable
to the camera.
80
USB cable
Small connector
mark on the USB cable
Printing