Table of Contents
Advertisement
3.
Half-press the shutter button to
focus the image.
When focus is complete, the camera
will beep, the back lamp will light
green, and the focus frame will turn
green.
Half-press
Beep, beep (Image is in focus.)
4.
Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
Full-press
Snap (Image is recorded.)
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
When you half-press the shutter button, the
camera automatically adjusts exposure and
Press lightly
focuses on the subject it is currently pointed
until the
at. Mastering how much pressure is required
button stops.
for a half-press and a full-press of the shutter
button is an important technique for good-
looking images.
• The focus frame in the screen shots
Recording a Movie
Press [0] (Movie) to start
movie recording. Press
[0] (Movie) again to stop
movie recording. See
page 45 for details.
25
Back lamp
included in this manual is shown at ß.
Note that you can change the form of the
focus frame, if you want (page 57).
Focus frame
[
] (Movie)
0
Quick Start Basics
Advertisement
Table of Contents
