Yamaha Super Tenere ES 2022 Owner's Manual page 30

Instrument and control functions
This timer shows the elapsed time
since the key was turned to "ON". The
maximum time that can be shown is
99:59.
This timer automatically resets when
the key is turned to "OFF".
TIP
There are also "TIME–2" and "TIME–3"
timer functions, but they cannot be set
to the information display pages. See
"Setting mode" on page 4-14 for more
information.
4
Air intake temperature:
A.TEMP
This shows the temperature of the air
drawn into the air filter case. The dis-
play range is 16 °F to 199 °F in 1 °F in-
crements.
TIP
 The displayed temperature may
vary from the actual ambient tem-
perature.
 The temperature reading may be
affected by engine heat when rid-
ing slowly (under 20 km/h [12
mi/h]) or when stopped at traffic
signals, etc.
Coolant temperature:
C.TEMP
This shows the temperature of the
coolant. The coolant temperature will
vary with changes in the ambient tem-
perature and engine load.
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 7-41.)
˚F
77
TIP
The information display pages cannot
be rotated when the engine overheat
message "Hi" is flashing.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption:
This function calculates the average
fuel consumption since it was last re-
set. The average fuel consumption can
be displayed as "km/L", "L/100km" or
˚F
Lo "MPG".
4-13
GEAR
4
C.TEMP
FUEL AVG
 "km/L" shows the number of kilo-
meters traveled on one liter of fuel.
 "L/100km" shows how many liters
of fuel is needed to travel 100 km.
˚F
Hi
ECA10022
MPG
28.9