Cooling Operation; Dehumidifying Operation; Fan Operation; Timer Operation - NewAir NAC14KWH03 Owner's Manual

IMPORTANT: Before using this appliance, check that the exhaust hose has been
mounted properly.
CAUTION - For cooling and dehumidifying operations:
• When using the cooling and dehumidifying functions, maintain an interval of
at least 3 minutes between each power ON/OFF.
• Ensure that unit's the power supply meets the above specified
requirements.
• Ensure that the electrical socket is intended for AC use.
• Do not share power supply socket with other appliances.
• The power supply for this appliance must be AC115V/60Hz.

COOLING OPERATION

• Press the MODE button until the COOL icon appears.
• Press the DOWN or UP buttons to select your desired room temperature
(61°F-88°F).
• Press the FAN button to select fan speed.

DEHUMIDIFYING OPERATION

• Press the MODE button until the DEHUMIDIFY icon appears.
• Set the selected temperature to current room temperature minus 2°F.
• Set the fan to LOW fan speed.

FAN OPERATION

• Press the MODE button until the FAN icon appears.
• Press the FAN button to select fan speed.

TIMER OPERATION

To set a timer for powering on:
• Press the TIMER button and select a desired time for the unit to power on by
using the time settings buttons. You can also select a desired temperature.
• "Preset ON Time" will be displayed on the operation panel.
• "ON Time" can be set for any time from 0-24 hours.
• Press the TIMER button again to confirm settings. Timer indicator light will
illuminate.
• To deactivate the timer function, press the TIMER button until the timer
indicator light turns off.
www.newair.com
EN
20