Bissell CLEANVIEW COMPACT 3508 Series Manual page 13

Cleaning the Hose and Foot
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
1
Locate the stretch hose where it
connects to the hose elbow on the
back of the vacuum. Look to see if
there is any debris in the hose and
hose elbow. Clean as necessary.
NOTE: If the debris cannot be reached through the hose, then follow the
instructions for cleaning the air passageway in "Cleaning the Brush Roll"
section.
2
Locate the clear foot hose under the
hose holder. Remove the two screws
and clear clogs and debris in the hose.
Use a long narrow object such as a
broomstick to clean the hose. Replace
two screws and reattach stretch hose
by sliding over inlet and rotating
upwards towards the lock position.
BISSELL.com 13