Displays2go TVCON49MO Assembly Instructions

ASSEMBLY INSTRUCTIONS
49" TV Console
TVCON49MO
TVCON49SS
TVCON49OK
2 people
are required
How to join 2 boards with CAM lock:
(a) Insert cam post into flat surface of a board and fix it with
a screw driver. Do not over tighten. Fit the hole in the edge
of the joining board over the cam post.
(b) Insert the cam lock into the cam hole. Be sure the
opening section on the back fits the head of the cam post.
(c) Use a screw driver to turn the cam lock clockwise so it
locks onto the head of the cam post. Do not over tighten.
1. Insert 6 cam posts (H2) into holes on Bottom Panel E.
Tighten only until snug. Fit cam holes in the edge of Toe Kick
Panel F over the cam posts. Insert 4 cam locks (H1) into cam
lock holes on Panel F, use a phillips screw driver to turn cam
locks clockwise to secure cam posts.
DO NOT over-tighten.
E
3. Attach the panel assembly in Step 2 to the bottom panel
as shown. Insert cam locks into cam lock holes and tighten
to secure.
No. Qty. Description
A
B1
B2
C
D
Tool Needed:
E
F
Phillips Screwdriver
Dowel Hole
F
PARTS LIST
No. Qty. Description
1 Top Panel G 1
1 Side Panel-Left H 1
1 Side Panel-Right I 2
2 Front Leg J 1
2 Back Leg K 1
1 Bottom Panel L
2
1 Toe Kick Panel M 2
(a)
H2
Join Panels
2. Insert cam posts into Middle Panel G and Front Panel H.
Attach Panel H to Panel G as shown and secure it with cam
locks.
G
4. Attach Shelf Panels (I) on both sides of the panel assembly
in Step 3 as shown. Use cam locks to secure the shelves.
I
No. Qty. Description
Middle Panel
H1 74
Cam Lock
Front Panel
Shelf
H2 74 Cam Post
Horizontal Panel
H3 4 Grommet Cap
Back Panel
Back Panel
H4 4 Grommet Sleeve
Corner Panel
(b) (c)
H1
Insert Cam Lock Tighten Cam Lock
Wood Dowel
H
I
V21.04
1 of 3