6-4 CLEANING Clean the external metal components using approved cleaning solution on a cloth and wipe
with a clean, lint free cloth. Remove stubborn accumulations with a nonmetallic, stiff bristle brush.
Do not immerse the transducer or MS connector assembly in cleaning solutions. Do not
allow cleaning solutions to enter the transducer housing.
a) Dry metal components by wiping with a clean lint free cloth.
Do not place any cleaning tools inside the pressure port connection of the sensor.
Damage to the diaphragm can result.
The pressure transducer is to be fully assembled and POT cover to be secure prior to
cleaning.
CAUTION
CAUTION
6-6