Environmental Protection; General Information; Technical Data - HOGERT HT2C551 User Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 3
EN
USER'S MANUAL
HEAT GUN HT2C551
Thank you for purchasing our product. Manufactured to a high standard, this
product will, if used according to these
instructions, and properly maintained, give you years of trouble free per-
formance.

ENVIRONMENTAL PROTECTION

Symbol indicating separate collection of electrical and electro-
nic equipment waste. Used electrical appliances are secondary
raw materials - they must not be disposed of in household wa-
ste, as they contain substances hazardous to human health and
the environment! Please actively help us to manage natural
resources and protect the environment by handing over used
equipment to the waste electrical equipment storage point. To reduce the
amount of waste disposed of, it is necessary to reuse, recycle or recover it in
another form.

GENERAL INFORMATION

The device is intended for use both in private households and for commer-
cial purposes. The heat gun is designed to be blown with a hot air stream.
It can be used for removing oil paints and varnish coatings, soldering with
tin alloy (60% Sn 40% Pb) with a melting point of about 400˚C, shrinking
thermo-shrinkable materials, heating of objects, thawing, drying, welding of plastic elements, etc. Any other use is not intended and
may lead to property damage or even personal injury. Use the device only in accordance with this manual. The manufacturer does not
assume any liability for damage caused by improper use.
GENERAL SAFETY CONDITIONS
It is within the scope of the owner and user's responsibility to read, understand and follow these rules:
IMPORTANT: Please read this manual carefully. Please pay special attention to the requirements of safe use, warnings and
notices. Use the product correctly and carefully for the purpose for which it is intended. Failure to do so may cause damage
and/or harm to health and will void the warranty. Please keep this manual in a safe place for further use. When passing the
device on to another person, also give them the user manual.
• Please use the device only for the purpose intended for the device.
• Please keep the device away from heat, direct sunlight, moisture (under no circumstances immerse in liquid substances) and sharp
edges. Do not operate the device with wet hands.
• Do not leave the device running unattended. Always switch off the unit before leaving the room.
• Check the device regularly for any faults. In case of damage, stop using the device.
• For the safety of children, please do not leave any freely accessible parts of the packaging (plastic bags, cartons, polystyrene, etc.).
WARNING
Don't let the kids play with the foil. Danger of suffocation!
This device is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and/or skills,
unless such persons are accompanied and supervised by persons responsible for their safety or have received precise instructions
for the device usage and understand the risks involved. Children may only use this device if they are over 8 years old and under the
supervision of a person responsible for their safety or if they have received instructions for use of this device and understand the risks
involved. Children cannot play with this device.

TECHNICAL DATA

Parameter
Index
Network voltage
Network frequency
Rated power
Run
Blow temperature
Airfl ow
Electrical insulation class
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
Unit of measurement
[V]
[Hz]
[W]
[˚C]
[l/min]
Value
HT2C551
~230
50
2000
I
60~350
60~600
300
II
II
500
3

Advertisement

Table of Contents
loading

Table of Contents