Operation - Hammerhead UM250IIR 2005 Owner's Manual And Parts Manual

Operation

A. Operation controls
WARNING - Do not attempt to start or operate the engine until complete familiar with the location and use of
each control necessary to operate this vehicle. The operator must know how to stop this machine before starting
and driving it.
a. Throttle
The right foot pedal is the throttle that controls the kart speed. As the engine speed increases above idle, the
clutch automatically engages and moves the vehicle forward. (See Fig. 1)
b. Brake
The brake is the left foot pedal (See Fig. 1). Applying pressure to the pedal slows or stops the kart.
c. Start engine
Insert the key into key-switch, turn the key
clockwise, release the key when the engine starts.
The engine will warm up within 5 minutes and the
choke will close automatically allowing operation at
normal RPM (Warning: Don't crank the starter for
more than 5 seconds at one time).
d. Engine stop button
Important-stop button test.
Before driving this vehicle, test the Engine
Stop Button to ensure that it is operating properly.
With the engine running, push and hold the
Engine Stop Button for two seconds for the
engine to shut down.
: igure 1
Figure 1!