Aqua-Hot 100 Series Installation Manual page 10

Fluid Expansion Bottle Burner Harness
Gas Burner Wire Harness
The gas burner and connectors will need to be properly installed.
Please note that the connectors will not fit in incorrect positions.
The connectors and information are shown below.
B1 Connector
Figure 27
B1 Plug:
The B1 plug is the connector to the gas burner.
Manufacturer Part No. Common Name
TE Connectivity 2109441-4 Socket Housing
TE Connectivity 1-968857-1 Terminal
TE Connectivity 828905-1 Wire Seal
TE Connectivity 828922-1 Plug, Blue (Pins 1, 2, & 5)
X3 Connector
Figure 28
X3 Plug:
The X3 plug is the connector for the Aqua-Hot to the burner.
Manufacturer Part No. Common Name
3-Pin Mate-N-Lok
TE Connectivity 1586849-1
Receptacle Connector
TE Connectivity 350690-2 Pin
TE Connectivity 350551-6 Socket
p. 16 ©Aqua-Hot® 125-GN1 Installation Manual REV 220427
B3 Connector
Figure 29
B3 Plug:
The B3 plug is the connector for the fuel pump to the gas burner.
Manufacturer Part No. Common Name
TE Connectivity 282104-1 Socket Housing
TE Connectivity 282404-1 Terminal
TE Connectivity 281934-4 Wire Seal
B4 Connector
Figure 30
B4 Plug:
The B4 plug is the connector for the burner to the Aqua-Hot.
Manufacturer Part No. Common Name
3-Pin Mate-N-Lok
TE Connectivity 350766-4
Receptacle Connector
TE Connectivity 350690-2 Pin
TE Connectivity 350551-6 Socket
B2 Connector
Figure 31
B2 Plug:
The B2 plug is the connector for the converter.
Converter Side Connector
Burner Side Connector
Figure 32
F1 Fuse Holder
Figure 33
F1 Fuse Holder:
The F1 Fuse holder, with 20A fuse.
Manufacturer Part No. Common Name
Packard 15300027 Female Connector
Aptiv 12129493 Terminal
Aptiv 15300014 Lock
Aptiv 15324983 Seal
Aptiv ES10 Cover
Packard - 20Amp Fuse (included)
©Aqua-Hot® 125-GN1 Installation Manual REV 220427
Fluid Expansion Bottle Burner Harness
K_Line Converter
Figure 34
K_Line Converter:
The K_Line converter connects the burner to the Aqua-Hot. The
LEDs show the operation of the converter. They can be found on
the side of the converter. Reference the images below for more
information.
K_Line Converter TOP
View LEDs Description
Figure 35
NOTE: It is recommended to mount the K_Line
Converter using double-sided Velcro on the Aqua-Hot
cabinet, either on the top, in-between ports, or either
side of the cabinet where space allows.
p. 17