Mac Address Filtering - Planet WGSW-2840 User Manual

disconnected or powered-off from the network, and then reconnected at some time later. If the Network
station is connected with one port want to control the switch, the station's MAC Address must be the
same as one MAC Address
To bind the MAC Address, click on the Security/MAC Address Binding menu button, the main web
page then shows the MAC Address Bind function table.
1. Fill the MAC Address field with MAC address in the format "xx-xx-xx-xx-xx-xx " and choose the port
to bind the MAC Address in the Port field.
2. Click on the "Add" button.
3. To remove the MAC Address binded by the port. Simply click on the "Delete" button of the MAC
Address in the Show MAC Address Table.

4.7.3 MAC Address Filtering

MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the
destination addresses.
To filter the MAC Address, click on the Security/MAC Address Filtering menu button, the main web
page then shows the MAC Address Filtering function table.
1. Fill the MAC Address field with MAC address in the format "xx-xx-xx-xx-xx-xx ".
2. Click on the "Add" button to add.