Impulse Dynamics OPTIMIZER Smart Mini Patient Manual page 51

ETSI EN 301 489-1 and ETSI EN 301 489-27
GUIDELINES AND MANUFACTURER'S DECLARATION – ELECTROMAGNETIC
EMMISSIONS OF THE VESTA CHARGER PURSUANT TO:
ETSI EN 301 489-1 V2.2.3 - ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical requirements; Harmonised
Standard for ElectroMagnetic Compatibility
ETSI EN 301 489-27 - ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 27: Specific conditions for Ultra Low Power Active
Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) operating
in the 402 MHz to 405 MHz bands; Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU
The Vesta Charger, part of the OPTIMIZER Smart Mini System is intended for use in an
electromagnetic environment as specified below. The customer or user of the Vesta
Charger must ensure that it is used within the specified environment.
There may be potential difficulties in ensuring electromagnetic compatibility in other
environments, due to conducted as well as radiated disturbances
Emissions Test
Radiated Emissions
EN 55032:2012/AC:2013
Conducted Emissions
EN 55032:2012/AC:2013
AC Harmonic Emissions
IEC 61000-3-2:2014
Voltage Flicker
IEC 61000-3-3:2013
Compliance
Class B
Class B
Class A
Pass for all parameters
45
Electromagnetic
environment -
guidelines
The INTELIO Programmer
with INTELIO
Programming Wand must
emit electromagnetic
energy in order to perform
its intended function.
Nearby electronic
equipment may be
affected
The INTELIO Programmer
with INTELIO
Programming Wand must
emit electromagnetic
energy in order to perform
its intended function.
Nearby electronic
equipment may be
affected.
Class A equipment is
equipment suitable for use
in all establishments other
than domestic buildings,
and Class B equipment is
equipment suitable for use
in domestic
establishments and in
establishments directly
connected to a low