Impulse Dynamics OPTIMIZER Smart Mini Patient Manual page 50

GUIDELINES AND MANUFACTURER'S DECLARATION – ELECTROMAGNETIC
EMMISSIONS OF THE VESTA CHARGER PURSUANT TO:
ETSI EN 301 839 V2.1.1 - Ultra Low Power Active Medical Implants (ULP-AMI) and
associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to
405 MHz; Harmonised Standard covering the essential requirements of article 3.2
of the Directive 2014/53/EU
The Vesta Charger, part of the OPTIMIZER Smart Mini System is intended for use in an
electromagnetic environment as specified below. The customer or user of the Vesta
Charger must ensure that it is used within the specified environment.
Emissions Test
Frequency Error
Occupied Bandwidth
Power Output
Transmitter Spurious
Emissions (30 MHz to 6
GHz)
Frequency Stability Under
Low Voltage Conditions
Spurious Radiation of
Receivers
ETSI EN 301 839
Compliance
Complies with clause 5.3.1
Complies with clause 5.3.2
Complies with clause 5.3.3
Complies with clause 5.3.4
Complies with clause 5.3.5
Complies with clause 5.3.6
44
Electromagnetic
environment -
guidelines
The Vesta Charger must
emit electromagnetic
energy in order to perform
its intended function.
Nearby electronic
equipment may be
affected