Subscribe to Our Youtube Channel
Related Manuals for Regulus RBC 200
Summary of Contents for Regulus RBC 200
- Page 1 Installation and Operation Manual HOT WATER STORAGE TANKS RBC 200, RBC 300, RBC 400, RBC 500, RBC 750, RBC 1000, RBC 1500, RBC 2000, RBC 2500 a RBC 3000 RBC 200 - 3000...
-
Page 2: Table Of Contents
6.4 Connection to water mains ....................6.5 Electronic anode rod installation ..................6.6 Commissioning ........................7 Tank Insulation ..........................8 Maintenance, Replacement of Magnesium Anode Bar ..............9 Disposal ............................10 Warranty ............................REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │... -
Page 3: Description
2× lateral with G 5/4“ inner thread, of the heating heat exchanger circuit 2× lateral with G 5/4“ inner thread (RBC 200, RBC 300 and RBC 400 with G 1“ inner thread, RBC 1500 - 3000 with G 2“ inner thread) for cold water inlet and hot water outlet 2×... -
Page 4: General Information
(heat pumps, solar collectors). An electric heating element can be installed into the tank for DHW auxiliary heating. Hot water temperature should be set to 60-65 °C. This temperature guarantees the best operation and at the same time, it prevents formation of Legionella bacteria. REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │... -
Page 5: Technical Data And Dimensions Of Rbc Models
Max. working pressure - tank ............. 10 bar Max. working pressure - heat exchanger ........... 10 bar DHW heating ∆t =35 °C (80/60 - 10/45) - heat exchanger ....f REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │... - Page 6 G 5/4“ F 268- G 5/4“ F 335 G 5/4“ F 400 G 5/4“ F 400 G 5/4“ F 520 G 5/4“ F 550 G 5/4“ F 640 G 5/4“ F 640 G 5/4“ F 1640 REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │...
-
Page 7: Typical Installation Examples
5 - Typical Installation Examples Example I. With solar thermal collectors REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │... - Page 8 Example II. With a boiler. REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │...
-
Page 9: Installation And Commissioning
If the pressure from water mains exceeds 6 bar, a pressure reducing valve is necessary. In order to prevent water loss, an expansion vessel should be installed at the cold water inlet as well (8 l volume for RBC 200, 12 l volume for RBC 300 and 400, 18 l volume for RBC 500, 24 l volume for RBC 750, 35 l volume for RBC 1000, 60 l volume for RBC 1500, 80 l volume for RBC 2000, 100 l volume for RBC 2500 and 2×60 l volume for RBC 3000). -
Page 10: Commissioning
○ defects caused by mechanical damage to the product, ○ defects caused by tampering or incompetent repair. REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │... -
Page 11: Maintenance, Replacement Of Magnesium Anode Bar
This product is covered by warranty according to the conditions described in this Manual and according to the Warranty Certificate. A Warranty Certificate is an integral part of the supply. Tank transport or storing in a horizontal position is considered a warranty violation! REGULUS - RBC Hot Water Storage Tanks - www.regulus.eu │... - Page 12 ©2022 We reserve the right to errors, changes and improvements without prior notice. REGULUS spol. s r.o. E-mail: sales@regulus.eu Web: www.regulus.eu...
Need help?
Do you have a question about the RBC 200 and is the answer not in the manual?
Questions and answers