Control Panel Screen
When you connect, the camera control panel screen will be displayed.
The function on the control panel can be shown below:
Button
Camera
Direction
Camera
Speed
Recall/Preset
mode
Video
Resolution
Preset
or
Recall
positions
Video
Brightness
Adjustment
Image
quality
Camera direction Up, Down, Left, Right, Home
Camera speed adjustment
Adjust camera focus Recall/Preset Mode
Video Resolution
Camera Preset/Recall positions
Frame rate adjustment via image quality
Audio feature On/Off
Camera Control Panel Screen
Control camera up/down/left/right and home position
Increase/decrease the camera Pan/Tilt speed
Preset: set up camera fixed locations before operation
Recall: Set camera position to preset location
Adjust Video resolution
The ICA-500 provides 4 resolutions:
640x480, 352x288, 320x240, 176x144
For NTSC camera: 320x240 is suitable
For PAL camera: 352x288 and 176x144 are suitable
However, all resolution are available for NTSC and PAL
camera
Preset or Recall camera 1~16 location(s)
Ex. If you press 5, then the camera will move to preset
location 5.
Adjust Camera video brightness
Adjust image quality.
Clarity: Video is better but frame rate may be slower
Fluency: Video is not as good as Clarity but frame rate may
Video Brightness adjustment positions
Definition
20