Section 2 Specifications
2-3 Names and Functions
2-3-1 Analog input unit (Type: NA0AX06-MR)
(1) Names
The jumper pins in the analog input unit are used to change the analog signal range and digital value range. Therefore, remove
the upper cover and control board when setting the jumper pin.
2) Terminal block
Expansion connector (IN)
1) Status indication LED
2) Terminal block
3) JP1
Pin layout of control board
(When the upper cover is removed)
Expansion connector (OUT)
Nameplate
4) JP3
5) JP7 (CH3)
5) JP6 (CH2)
Pin layout of I/O board
(When the control board is removed)
2-12
5) JP5 (CH1)
5) JP5 (CH0)
4) JP2
5) JP8 (CH4)
5) JP9 (CH5)