Table of Contents
Advertisement
C
S
OMMAND
EEDER
14. Unauthorized modifications to the machine may impair the function and/or safety of
the machine and reduce its life. If equipment has been altered in any way from the
original design, the manufacturer does not accept any liability for injury or warranty.
The following illustrations show lubrication points. The frequency of lubrication given is
based on normal operating conditions. Severe or unusual conditions may require more
frequent lubrication.
Use a good quality SAE multipurpose type grease for all locations shown. Be sure to
clean fittings thoroughly before using grease gun. Immediately replace broken or
missing fittings.
Fig. 10 - Lubrication points.
Seed hopper clean out:
The seed cups on the hopper are designed for easy clean out. To completely clean out
the seed hopper, move the main seed calibration handle on the hopper in the fully open
position (see fig. 6), then move the seed cup regulation lever (see fig. 7) into the clean
out position. Use a soft brush to guide any remaining seed in the hopper through the
seed cups.
M
AINTENANCE
4.02 - Service
24
O
'
M
PERATOR
S
ANUAL
ABI A
TTACHMENTS
Advertisement
Table of Contents
