Table of Contents
Advertisement
3.8
Advanced Settings
The WL-8315 provides more advanced parameters in Windows Device Manager. You can find the
Advanced configuration following the step A to D in section 3.7. Please check below to know the
function of the settings.
Note: The chipset manufacturer reserves those functions in red for future use. Those options are not
effective on WL-8315.
Function
AdHoc Wireless Mode
Auto Channel Select
Auto Reconnect Mode
B/G protection
CAM when AC power
Country Region 11A
Country Region 11G
Frame Threshold
Frame Aggregation
IEEE 802.11h
Local Administration MAC...
Network Type
Power Saving Mode
Radio On/Off
RTS threshold
SSID
WMM capable
Description
Select B/G mixed or Pure B mode
Not applicable on WL-8315.
Auto connecting to AP when disconnected.
To avoid collision when B mode station and G mode station exist
concurrently.
When use AC power, it doesn't enter into sleep mode.
Not applicable on WL-8315.
Supporting 11G Channel for different country.
To enhance throughput when traffic is high.
To ehhance throughput when traffic is low.
Not applicable on WL-8315.
Using different MAC address if wanted. This MAC address will not
write to EEPROM. It is only used in run time.
Selecting Infrastructure or AdHoc mode.
Selecting different power mode.
RF switching.
To prevent hidden node.
AP's broadcast name.
Please refer to section 3.7.
25
Advertisement
Table of Contents
