Date & Time - Planet Wired / Wireless IR IP Camera ICA-108W User Manual

3.7.2 Date & Time
You can setup the time setting of IR IP Camera, make it synchronized with PC or remote NTP
server. Also, you may select the correct time zone of your country.
Server Date
& Time:
PC Time:
Adjust:
NTP server name:
NTP sync. Interval:
Time zone:
Daylight saving:
Daylight Saving
Displays the date and time of the IR IP Camera
Displays the date and time of the connected PC
Manual setting: Click this option to set time and date manually
Synchronize Click this option if you want to synchronize the IR
with NTP: IP Camera's date and time with those of time
server
Protocol)
Synchronize Click this option to enable time synchronization
with PC: with PC time
Type the host name or IP address or domain name of the NTP
server.
Select an interval between 1 and 23 hours at which you want to
adjust the IR IP Camera's time referring to NTP server
Set the time difference from Greenwich Mean Time in the area
where the IR IP Camera is installed.
Check this item to enable daylight saving adjustment.
Sets up the date and time of daylight saving start time.
49
called NTP server (Network Time