Ip Filter - Planet Wired / Wireless IR IP Camera ICA-108W User Manual

In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT
traversal when your device is located on an intranet (LAN) and you wish to make it available from
the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an
external HTTP port in the NAT router will be forwarded to the device.
UPnP:
Friendly Name:
UPnP NAT Traversal:
Port Range:
External IP address:

3.5.7 IP Filter

You can enter different user's IP address which are allowing enter or denying by the device.
To enable or disable the UPnP service here.
Shows the friendly name of this device here.
When enabled, the device will attempt to configure port mapping in
a NAT router on your network, using UPnP™. Note that UPnP™
must be enabled in the NAT router first.
The port range will open in NAT router.
Show the IP address and port for WAN access through Internet. If
NAT traversal is configured successfully, user can use this IP
address and port to access this device.
42