lopital Elexo 5100 Instructions For Use Manual page 13

Option: Comfort leg supports.
The comfort leg supports provide the legs with additional support . The comfort leg
supports can be adjusted in length as well as according to the sitting angle . The angle
of the leg supports can be adjusted to 4 positions (See figure 6 to 9) . To change the
seating angle, you have to release the locking pin . When you have determined the
correct position, lock the sitting angle of the comfort support once again (See figure 10) .
Make sure that the locking pin slips in well into one of the 4 holes.
Figure 6 to 9 Adjustable seating angle .
Figure 10 Locking pins .
To adjust the length of the leg support, you have to release the locking pin underneath
by loosen it a bit (See figure 10) . Choose the right length for the leg support and tighten
the locking pin again .
Make sure that both the sitting angle and the length of the leg support are
locked properly as soon as they have to support a load.
Always place these parts on the seat as soon as you finish using them. This
prevents you from looking for the parts.
Setting the angle of the locking pin
Setting the length of the locking pin
Elexo Shower-toilet chair | Instructions for use | 13