Timer Function; Programming Auto Heat Up - Novy Easy User Manual

4.3.5 Timer function

The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 1H59 minutes)
for each zone.
Timer function
Setting or changing the cooking time
Select the power by gliding your finger over the
slider
Select the timer
Press the timer icon above the zone selection
key for the required cooking zone
Reduce the time
Press [–] on the timer
Increase the time
Press [+] on the timer
After a few seconds the LED
has been selected and the countdown has begun.
Switch off the timer function
Select the timer
Press the timer icon above the zone selection
key for the required cooking zone
Stop the timer
Keep pressing [–] on the timer until the timer
000
displays .
If different timers are to be activated on multiple zones, this
operation must be repeated several times. The activated timer
indication no longer lights up above the relative cooking zone.
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
Using the timer without cooking:
Timer without cooking
Switch on the hob.
Press for 2 seconds.
Wait 10 seconds
Select the timer
Press the timer indicator [000]
Reduce the time
Press [–] on the timer
Increase the time
Press [+] on the timer
After a few seconds the timer display stops flashing. The time is
selected and counting down starts.
Display
1‐P
0 0 1‐
1 5 9...
0 6 0‐
0 5 9...
no longer flashes. The time
Display
0 0 0
Display
0 0 0
0 6 0‐
0 5 9...
0 0 1‐
0 0 2...
Turn off automatically at the end of the cooking time:
As soon as the selected cooking time is up, the display will flash
‐‐‐
, a beep will be heard. To stop the audible signal and the
flashing, press [ ] on the timer.
000

4.3.6 Programming auto heat up

All cooking zones are equipped with an auto heat up function.
The cooking zone will initially operate at full power for a certain
amount of time before automatically reducing to the selected
power level.
Programming auto heat up:
Activating auto heat up
Glide your finger over the slider to (for example)
7
and hold for 3 seconds
Switching auto heat up off
Glide your finger over the slider
Set value for cooking time
1
2
3
4
5
6
7
8
9
– 49 –
0 9
to
Auto heat up table
Auto heat up function
Time (min:sec)
0:40
01:12
02:00
02:56
04:16
07:12
02:00
03:12
--:--
Display
7 A
Display
0‐9