Power Function And Super Power Function; Timer Function - Novy Panorama 120 Pro User Manual

Hide thumbs Also See for Panorama 120 Pro:
Table of Contents

Advertisement

Available languages

Available languages

4.3.4 Power function and Super Power function

The Power function
and Super Power
P
power rating of the selected cooking zone. If this function is
activated, these cooking zones will be subjected to considerably
higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch off Power
Glide your finger over the slider
Switching Super Power on and off:
Switch on power
Glide your finger over the slider to the end or
push the end of the slider
Switch on Super Power
Press the end of the slider again
Switch off Super Power
Glide your finger over the slider
Switch off Power
Glide your finger over the slider
Management of maximum power:
The hob is divided into 2 or 3 separate heating groups
depending on the hob model.
C2
C1
Novy Panorama Pro 120 with 4 cooking zones
B2
B1
Novy Panorama Pro 120 with 5 cooking zones
increases the
Display
P
9‐0
Display
P
P‐0
9‐0
A2 A1
C2
A2 A1
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power function on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
The maximum individual power for each zone is 3000 W.
If simultaneous cooking is taking place on zones A1 and A2 or B1
and B2, the power of 3700 W is divided between these 2 zones
A1 and A2 or B1 and B2 or C1 and C2.
Cooking zone in cm
A1
A2
B1
B2
C1
C2
+ P
Power limit
Selected cooking zone with Power function
Power limit activated
[9] reduced to [8] and flashes
In order to be able to make use of the maximum possible power
for 2 zones at the same time, use a combination of zone A1 or
A2 and B1 or B2.

4.3.5 Timer function

The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 1H59 minutes)
for each zone.
Setting or changing the cooking time
Select the power by gliding your finger over the
slider
Select the timer
Press the timer icon above the zone selection
key for the required cooking zone
Reduce the time
Press [–] on the timer
Increase the time
Press [+] on the timer
After a few seconds the LED
has been selected and the countdown has begun.
– 55 –
Power (W)
24 x 20
Normal: 2100
24 x 20
Power: 2300
24 x 20
Super Power: 3000
24 x 20
Ø 23
Normal: 2300
Power: 3000
Ø 28
Normal: 2300
Power: 3000
Timer function
no longer flashes. The time
Display
P
8
Display
1‐P
0 0 1‐
1 5 9...
0 6 0‐
0 5 9...

Advertisement

Table of Contents
loading

This manual is also suitable for:

4211042120

Table of Contents