Connecting Your Component With No Hdmi Terminal - Pioneer VSX-5231 Operating Instructions Manual

2
2
Connecting your component with no HDMI
terminal
This diagram shows connections of a TV and DVD player (or
other playback component) with no HDMI terminal to the
receiver.
Note
• In order to listen to the audio from the TV that is connected
to this receiver using a analog audio cables, set-up for
analog audio input is required (see The Input Assign menu
on page 32).
• You can only connect one component to the optical input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using an optical cable,
first, switch to the DVD (DVD player) or SAT/CBL (set-top
box), then press to choose the audio signal
SIGNAL SEL
O1 (OPTICAL1) (see Selecting the audio input signal on
page 21
• You can only connect one component to the coaxial input
terminal. If connecting other devices, please use a different
method to connect the audio.
In order to listen to the audio from the source component
that is connected to this receiver using a coaxial cable, first,
switch to the DVD (DVD player) or SAT/CBL (set-top box),
then press to choose the audio signal C1
SIGNAL SEL
(COAXIAL1) (see Selecting the audio input signal on
page 21.
DVD player
Select one
VIDEO OUT
ANALOG AUDIO OUT DIGITAL AUDIO OUT
R L OPTICAL COAXIAL
15
Connecting your equipment
Set-top box
Select one
VIDEO OUT
ANALOG AUDIO OUT DIGITAL AUDIO OUT
R L OPTICAL COAXIAL
COAXIAL
IN1 (CD)
DVD IN
SAT/CBL IN
ANALOG
IN1 (CD)
MONITOR
OUT
VIDEO IN
TV
4
6
34
This connection is
required in order to
listen to the sound
of the TV over the
receiver.
OPTICAL
IN1 (TV)
R L
OPTICAL
ANALOG AUDIO OUT DIGITAL AUDIO OUT
Select one