Table of Contents
Advertisement
The System Setup menu
• ALL CH ADJUST – A 'flat' setting where all
the speakers are set individually so no
special weighting is given to any one
channel.
• FRONT ALIGN – All speakers are set in
accordance with the front speaker settings
(no equalization is applied to the front left
and right channels).
You return to the Acoustic Cal EQ setup menu
after the Acoustic Calibration Equalization is
set.
Copying your Acoustic Calibration EQ
settings
If you want to manually adjust the Acoustic
Calibration EQ (see Setting the Acoustic
Calibration EQ manually below), we
recommend copying the ALL CH ADJUST or
the FRONT ALIGN settings from the EQ AUTO
setup above (or from Automatically setting up
for surround sound (MCACC) on page 8) to one
of the custom settings. Instead of just a flat EQ
curve, this will give you a reference point from
which to start.
1
Select 'EQ Data Copy' from the Manual
MCACC setup menu.
3.Manual MCACC
a.Fine Ch Level
b.Fine SP Distance
c.EQ AUTO Setting
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check
2
Select CUSTOM1 or CUSTOM2 then use
/ to select the setting you want to
copy.
3d.EQ Data Copy
TO
FROM
CUSTOM1
CUSTOM1
CUSTOM2
[
CUSTOM2
]
Start Copy
[
OK
]
:Cancel
:Return
3d.EQ Data Copy
TO
FROM
CUSTOM1
ALL CH ADJ
CUSTOM2
[
CUSTOM2
]
Start Copy
[
OK
]
:Cancel
• You can also copy from one custom
setting to another. For more on the ALL CH
ADJUST and FRONT ALIGN settings, see
Setting the Acoustic Calibration EQ
automatically above.
3
Select 'OK' to copy and confirm.
Setting the Acoustic Calibration EQ
manually
Before manually adjusting the Acoustic
Calibration EQ, we recommend copying the
ALL CH ADJUST or the FRONT ALIGN
settings from the auto setup above (or from
Automatically setting up for surround sound
(MCACC) on page 8) to one of the custom
settings. Instead of just a flat EQ curve, this
will give you a reference point from which to
start (see Copying your Acoustic Calibration EQ
settings above for how to do this).
1
Select 'EQ CUSTOM1 Adjust or EQ
CUSTOM2 Adjust' from the Manual
MCACC setup menu.
3.Manual MCACC
a.Fine Ch Level
b.Fine SP Distance
c.EQ AUTO Setting
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check
:Return
2
Select which method you would like to
use to adjust the overall frequency
balance.
It is best to choose whichever one you copied
to the custom setting in Copying your Acoustic
Calibration EQ settings above.
• ALL CH ADJUST – All the speakers can be
set independently so no special weighting
is given to any one channel. When
adjusting, test tones will sound for each
individual channel.
• FRONT ALIGN – Speakers are set in
accordance with the front speaker
settings. The sound of the test tone will
alternate between the left front (reference)
speaker and the target speaker.
3e.EQ CUSTOM1 Adjust
Test Tone Type
ALL CH ADJUST
ENTER:Next
:Cancel
06
39
En
Hide quick links:
Advertisement
Table of Contents
