Aux Mode; Settings - auna Blaster DAB Manual

EN
28
3. Select your favorite song, tap the
the Blaster DAB+ to play or pause the song from your BT device.
4. Press the ▲ or ▼ button to select the Next or Previous track.
5. If you want to pair (link) the Blaster DAB+ with another BT device, press
and hold the Pairing Button a few seconds. The "connected" will flash.
The Blaster DAB+ will go into Pairing/Discoverable mode. Repeat steps
3 & 4
Note: For more information, see your BT device's user manual. If you are
asked to enter a passcode, enter 0000.
Disconnecting a BT device
To disconnect a BT device, do one of the following:
• Press Source to switch to DAB or FM radio.
• Switch off BT on the connected device.

AUX MODE

This allows you to connect an external player's sound through your unit.
1. Plug a 3.5mm audio cable (not included) into your external player's line
out and the other end into the AUX IN jack at the rear of the unit.
2. The unit will automatically enter AUX mode.
3. Start your external player to play music. The unit will output the sound.
4. To return to another mode, disconnect the audio cable from the uni
Changing your preferred language
You can select the language that uses for menus and options.
1. Press hold the Menu Button for 2 seconds to view the main menu.
2. Press ▲ or ▼ and Select to choose 'System ' > 'Language'.
3. Press ▲ or ▼ and Select to select a menu language.

SETTINGS

Carrying out a factory reset
Resetting removes all presets, stored stations, alarms and resets all other
options to default settings.
⏯
button on your BT device or the on