Getting Started - auna Blaster DAB Manual

GETTING STARTED

Carefully remove the unit and all accessories from the package.
1. Connect one end of the supplied USB Type-C cable to the DC IN 5V port
on the speaker and the other end to a USB AC adaptor (commercially
available), and then connect the USB AC adaptor to an AC outlet.
The speaker supports USB AC adaptors that are capable of delivering an
output current of 1.5 A. Use of any other devices is not guaranteed for
battery charging.
• When the recommended USB AC adaptor capable of delivering an
output current of 1.5 A is connected, charging completes in about 5
hours* and the CHARGE indicator turns off.
• When using a commercially available USB AC adaptor, make sure that it
is capable of delivering an output current of 1.5 A or more. You can use
a USB AC adaptor with an output current of 500 mA or more and less
than 1.5 A as well, but it may take a very long time (10 hours or more*)
before charging completes. When using such a USB AC adaptor, it is
recommended that you turn off the speaker before battery charging.
Use of a USB AC adaptor with an output current of less than 500 mA is
not guaranteed for battery charging
2. Connect the other end of the Type-C cable to a power outlet, using a
USB power adapter. You can also charge the battery by connecting DAB
to a computer's USB port.The CHARGE indicator flashes.
EN
25