Table of Contents
Advertisement
Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.
Sleeping(MinTime)
th
0H
15
M
Wakes up and
Wakes up and
collects data
collects data
REPORT 3.6V
3.6V
Does not report
Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.
Wakes up and collects data
sleeping
sleeping
th
0H
15
M
Wakes up and
Wakes up and
collects data
collects data
REPORTS 3.6V
3.6V
Does not report
Notes :
1) The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not collect
data.
2) The data collected is compared with the last data reported. If the data variation is greater than the ReportableChange value, the
device reports according to MinTime interval. If the data variation is not greater than the last data reported, the device reports
according to MaxTime interval.
3) We do not recommend to set the MinTime Interval value too low. If the MinTime Interval is too low, the device wakes up
frequently and the battery will be drained soon.
4) Whenever the device sends a report, no matter resulting from data variation, button pushed or MaxTime interval, another cycle
of MinTime/MaxTime calculation is started.
MaxTime
sleeping
sleeping
th
30
M
Wakes up and
collects data
3.6V
Does not report
Does not report
3.5V |3.5-3.6|=0.1
REPORTS 3.5V
...
th
th
30
M
45
M
Wakes up and
collects data
3.5V
Does not report
sleeping
th
45
M
1H
Wakes up and
Wakes up and
collects data
collects data
3.6V
REPORTS 3.6V
Users push the button,
REPORTS 3.5V.
Recalculate MaxTime.
th
1H
1H 10
M
1H 25
Wakes up and
Wakes up and
collects data
collects data
3.5V
3.5V
Does not report
Does not report
8
MaxTime
Wakes up and
collects data 3.5V
Does not report
th
th
M
1H 40
M
Wakes up and
collects data
Does not report
th
th
1H 55
M
2H 10
M
Wakes up and
collects data
3.5V
REPORTS 3.5V
Advertisement
Table of Contents
