Table of Contents
Advertisement
16 Basic settings
You can configure the basic settings for your appliance to meet your needs.
16.1 Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid disp.
Extra Dry
1
Factory setting (may vary according to model)
Setting Intensive drying
Press
.
1.
Press and hold
2.
Turn the programme selector until
3.
flashes.
Release the button.
4.
Turn the programme selector until
5.
the right level has been set.
– If the LED
drying is switched on.
– If the LED
Intensive drying is switched off.
Press
to save the setting.
6.
a The LEDs go out.
Selection
Scale with 4 levels
Scale with 4 levels
On
1
Off
.
lights up, Intensive
does not light up,
Description
Set the water hardness.
→ "Setting water soften-
ing system", Page 21
Set the amount of rinse
aid to be dispensed or
switch off.
→ "Setting the amount of
rinse aid", Page 23
Switch ExtraDry on or off
for each operation.
For a better drying result
the temperature in the fi-
nal rinse is increased.
This may increase the
run time slightly.
Note: Please take care
with delicate tableware.
→ "Setting Intensive dry-
ing", Page 31
17 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
Never use detergents containing
▶
chlorine.
Basic settings en
31
Advertisement
Table of Contents
