Installing The Rubber Bumpers (Optional) - Advantech MIT-W101 User Manual

2.1

Installing the Rubber Bumpers (Optional)

To protect the housing case of MIT-W101, install the rubber bumpers.
1. Install the rubber bumpers on the left and right side of the MIT-W101.
2. Make sure the rubber bumpers are aligned and locked on the indents.
3. Attach the rubber bumpers on left and right of MIT-W101.
Note! The rubber bumpers provide drop protection. Please ensure the rubber
bumpers are in the correct position and the screws fastened firmly.
MIT-W101 User Manual 8