Filling The Coffee Maker With Water For Brewing; Pause And Pour Feature - KitchenAid 5KCM1204C Manual

OPERATING THE COFFEE MAKER

FILLING THE COFFEE MAKER WITH WATER FOR BREWING

TIP: Brew 2 pots of fresh, cool water and discard before brewing the first
pot of coffee�
Lift the water tank lid and fill
with enough fresh, cool water to
make the desired amount of coffee�
1
Use the cup indicators on the water
tank window to view water input�
Close the water tank lid�
NOTE: When using the Small Batch brew cycle, make sure to fill the tank with
only the amount of water needed to brew your desired number of cups� If you
put in 12 cups of water, the Coffee Maker will brew all 12 cups�

PAUSE AND POUR FEATURE

The Pause and pour feature enables you to remove the carafe from the Coffee Maker and
pour a cup of coffee before brewing is finished� When the carafe is removed,
a special valve stops the flow of coffee from the filter basket� However, brewing
does not stop� If the carafe is not placed back in the Coffee Maker within 25 seconds,
water and coffee grounds will overflow the filter basket�
W11048745B.indb 11
Place the carafe in the Coffee Maker�
Make sure the bottom of the carafe
is fully seated; otherwise, the Pause
2
and pour feature may not engage,
causing water and coffee to overflow
the filter basket�
OPERATING THE COFFEE MAKER | 11
11/12/2018 7:17:13 PM